CONTACT US

Wex-Cide 128

The Wex-Cide 128 concentrate is a powerful, one-step cleaner, disinfectant, and deodorizer—equipped with the germ-killing power and versatility to be a one-product cleaning and disinfecting solution across healthcare, schools and industry.

  • One-product cleaning system across all hard, non-porous surfaces
  • Simple one-step, no-rinse cleaning and disinfection
  • Approved on LIST N, for use against SARS-CoV-2, the Cause of COVID-19
CONTACT US FOR BUYING OPTIONS

Features and Benefits

  • Economical solution with 1:128 dilution
  • Solution may be applied with a cloth, mop or brush, spray, or by soaking

 

Powerful disinfection—broad efficacy:

  • Virucidal, germicidal, fungicidal and tuberculocidal efficacy
  • Effective against antibiotic resistant organisms
  • Effective against Norovirus, and human Coronavirus
  • Eliminates odor-causing bacteria

 

One-step, no-rinse cleaning & disinfection:

  • Meets EPA one-step cleaner disinfectant requirements
  • Proven efficacy in the presence of 5% organic soil load
  • 10-minute contact time for disinfection
  • No pre-cleaning or post-rinsing steps required

 

Versatile & economical one-product cleaning system:

  • Low pH—can safely be used on all hard, non-porous surfaces
  • Can replace specialized products (mirror cleaners, scouring powders, chrome cleaners, bowl cleaners, and deodorizers)
  • Simplifies cleaning protocols with a single product for all hard surfaces
  • 1:128 dilution—economical solution for cleaning and disinfecting

 

Non-irritating

  • No quats or bleach
  • Concentrate is not a toxic substance as defined by the Federal hazardous Substances Act (FHSA)
  • Concentrate is not a primary skin irritant as defined by the FHSA

Directions for use

  1. Add 1 ounce Wex-cide 128 to one gallon water in plastic pail.
  2. Use soft sponge or cloth and the Wex-cide 128 solution to cleanin the following order: Mirrors, Glass and Chrome Shelves andDispensers; Sinks and attached Chrome Fixtures and PipingCover; Seat and Exterior of the Toilets and Urinals; attachedFixtures and Piping; Partitions and Wall Surfaces. Surfacesmust remain wet for 10 minutes.
  3. Using a johnny mop and Wex-cide 128 solution, clean theinterior surfaces of the toilets and urinals. To disinfecttoilet bowls, add 1 pump full (1 oz. Wex-cide 128 concentrate) to the water in the toilet bowl. Allow 10minutes before flushing.
  4. Mix a solution of 1 ounce of Wex-cide 128 to eachgallon of water in a mop bucket and mop all floor areas.
  5. For cleaning and decontaminating surfaces soiled withblood or other body fluids which may contain HIV-1(AIDS Virus) – see label for special instructions.

 

To disinfect toilet bowls, add 1 pump full (1 oz. Wex-cide 128 concentrate) to the water in the toilet bowl. Allow 10 minutes before flushing.

A Great disinfectant for:

  • Schools
  • Daycare and Nurseries
  • Hospitals and Long-Term Care Facilities
  • Office Buildings
  • EVS and Janitorial Teams
  • Hospitality
  • Industrial

 

For use on hard, non-porous surfaces:

  • Stainless steel
  • Chrome
  • Mirror
  • Glass
  • Plastic
  • Vinyl
  • Porcelain

Safety Data Sheet

Wex-Cide 128 Brochure

Certifications

  • OSHA requirements for bloodborne pathogens
  • HMIS ratings of "0"
  • EPA List N approved — for use against SARS-CoV-2 (the cause of COVID-19)

Package Sizes

  • 1-Gallon Bottles / 4-Pack
  • 5-Gallon Pail
  • 55-Gallon Drum

Ingredients

CAS Number Ingredient Function
7732-18-5
Water
Solvent
107-41-5
Hexylene Glycol
Solvent
139-96-8
TEA-Lauryl Sulfate
Detergent
77-92-9
Citric Acid
Acidifier
79-33-4
Lactic Acid
Acidifier
90-43-7
o-Phenylphenola,b
Active Ingredient
120-05-0
Chlorophenec
Active Ingredient
112-05-0
Pelargonic Acids
Defoamer
68037-05-8
Ammonium C6-10-alkyl Polyoxyethlene Sulfate
Detergent
1310-58-3
Potassium Hydroxide
Base Source
67-63-0
Isopropanolc
Solvent
Withheld
Fragrance
Fragrance

a = chemical on Proposition 65 list
b = EU respiratory sensitizer
c = Chemical with noncancer endpoint and listed with an inhalation or oral reference exposure level by OEHHA.

Features and Benefits

  • Economical solution with 1:128 dilution
  • Solution may be applied with a cloth, mop or brush, spray, or by soaking

Powerful disinfection—broad efficacy:

  • Virucidal, germicidal, fungicidal and tuberculocidal efficacy
  • Effective against antibiotic resistant organisms
  • Effective against Norovirus, and human Coronavirus
  • Eliminates odor-causing bacteria

One-step, no-rinse cleaning & disinfection:

  • Meets EPA one-step cleaner disinfectant requirements
  • Proven efficacy in the presence of 5% organic soil load
  • 10-minute contact time for disinfection
  • No pre-cleaning or post-rinsing steps required

Versatile & economical one-product cleaning system:

  • Low pH—can safely be used on all hard, non-porous surfaces
  • Can replace specialized products (mirror cleaners, scouring powders, chrome cleaners, bowl cleaners, and deodorizers)
  • Simplifies cleaning protocols with a single product for all hard surfaces
  • 1:128 dilution—economical solution for cleaning and disinfecting

Non-irritating

  • No quats or bleach
  • Concentrate is not a toxic substance as defined by the Federal hazardous Substances Act (FHSA)
  • Concentrate is not a primary skin irritant as defined by the FHSA

Directions for use

  1. Add 1 ounce Wex-cide 128 to one gallon water in plastic pail.
  2. Use soft sponge or cloth and the Wex-cide 128 solution to cleanin the following order: Mirrors, Glass and Chrome Shelves andDispensers; Sinks and attached Chrome Fixtures and PipingCover; Seat and Exterior of the Toilets and Urinals; attachedFixtures and Piping; Partitions and Wall Surfaces. Surfacesmust remain wet for 10 minutes.
  3. Using a johnny mop and Wex-cide 128 solution, clean theinterior surfaces of the toilets and urinals. To disinfecttoilet bowls, add 1 pump full (1 oz. Wex-cide 128 concentrate) to the water in the toilet bowl. Allow 10minutes before flushing.
  4. Mix a solution of 1 ounce of Wex-cide 128 to eachgallon of water in a mop bucket and mop all floor areas.
  5. For cleaning and decontaminating surfaces soiled withblood or other body fluids which may contain HIV-1(AIDS Virus) – see label for special instructions.

 

To disinfect toilet bowls, add 1 pump full (1 oz. Wex-cide 128 concentrate) to the water in the toilet bowl. Allow 10 minutes before flushing.

A Great disinfectant for:

  • Schools
  • Daycare and Nurseries
  • Hospitals and Long-Term Care Facilities
  • Office Buildings

For use on hard, non-porous surfaces:

  • Stainless steel
  • Chrome
  • Mirror
  • Glass
  • Plastic
  • Vinyl
  • Porcelain

Safety Data Sheet

Wex-Cide 128 Brochure

Certifications

  • OSHA requirements for bloodborne pathogens
  • HMIS ratings of “0”
  • EPA List N approved — for use against SARS-CoV-2 (the cause of COVID-19)

Package Sizes

  • 1-Gallon Bottles / 4-Pack
  • 5-Gallon Pail
  • 55-Gallon Drum

Ingredients

CAS Number Ingredient Function
7732-18-5
Water
Solvent
107-41-5
Hexylene Glycol
Solvent
139-96-8
TEA-Lauryl Sulfate
Detergent
77-92-9
Citric Acid
Acidifier
79-33-4
Lactic Acid
Acidifier
90-43-7
o-Phenylphenola,b
Active Ingredient
120-05-0
Chlorophenec
Active Ingredient
112-05-0
Pelargonic Acids
Defoamer
68037-05-8
Ammonium C6-10-alkyl Polyoxyethlene Sulfate
Detergent
1310-58-3
Potassium Hydroxide
Base Source
67-63-0
Isopropanolc
Solvent
Withheld
Fragrance
Fragrance

a = chemical on Proposition 65 list
b = EU respiratory sensitizer
c = Chemical with noncancer endpoint and listed with an inhalation or oral reference exposure level by OEHHA.

KILLS 99.9% OF HOUSEHOLD GERMS

EPA LIST N
APPROVED

LOW
TOXICITY

HOSPITAL
GRADE

QUAT AND
BLEACH FREE

Wexford-Labs-logo-footer
CONTACT US

325 LEFFINGWELL AVE.
KIRKWOOD, MO 63122

314.966.4134

Linkedin

Disinfectants

Company

Technology